Front_angle_xm_kit_small
Reddit Twitter Digg Facebook Delicious Stumbleupon
Front_angle_xm_kit_small
Android_long_exposure_small
Beagle_embedded_starter_kit_xm_small
Beaglemod_small
Liquidware-android_ambrosia_sd_card_small
Wifi_board2_small
Connectors_small
Topdown-dvihdmi_small
Usbmini_small
Cardreaderangle_small
Two_kits_side_by_side_angle-m_small
Two_kits_side_by_side_front_angle-m_small

Android Ultimate Pro Kit

View Cart
$875.71

The Android Ultimate Pro Kit as the name suggests, contains just about everything an embedded systems developer might need to hack, prototype, and build on a BeagleBoard xM.

The pack includes the single core Beagle module: a BeagleBoard xM (Modified with top male headers on P9, P11, and P13), 4.3” BeagleTouch OLED display, BeagleJuice 2 battery pack, and a BeagleMod prototyping board.

It also includes many of the peripherals that might come in handy for developing on the BeagleBoard in a variety of different configurations – from handheld tablet to desktop hardware interface. For communicating directly over BeagleBoard serial, there’s an FTDI-DB9 cable and even on board Ethernet. The pack also includes a laptop-style, 5V power adapter.

Finally, the pack comes with a custom-tailored bootable Android Ambrosia SD card, with drivers and kernels specially designed to run Android applications from this hardware platform.

For prototyping to hacking, or just for fun, the Android Ultimate Pro Kit is an all-inclusive kit that gets you up and running for almost any embedded project.

The Beagle Embedded Enclosure is designed for the Android Ultimate Pro Kit and can provide a quick case solution to protect your prototype. Customize the enclosure for your panel-mount cables.


Beagle Embedded Enclosure

Specifications

  • Display: 4.3 inch touch display
  • Screen: 480×272 OLED screen
  • Battery Life: 10.5 hours of battery life
  • Operating System: Android
  • Processor Speed: 1000Mhz
  • RAM: 512MB DDR
  • 32-bit ARM Cortex-A8
  • Cores: Single Core
  • SD Storage: 4GB SD micro Storage
  • On Board Flash: none
  • Height: 3.63 inches (92.1mm)
  • Length: 3.96 inches (100.6mm)
  • Depth: 1.9 inches (48.4mm)
  • USB Host (Type A): 4 USB Host Port
  • USB Slave (Mini AB): USB OTG Port
  • Ethernet (RJ-45): on board 10/100 Ethernet RJ-45 (drivers not supported)
  • RS232 Serial Port Debugging: RS232 Serial Port
  • Video Output: HDMI to DVI
  • Video Output: S-Video
  • Speaker (Stereo Headphone Out): 3.5mm Audio Out
  • Microphone (Audio In): 3.5 Audio In
  • Hardware Prototyping Module: Hardware Prototyping Module
  • All-in-1 USB multi-card reader/writer: All-in-1 USB multi-card reader/writer
  • 2-Power Adapters: 5V, Beagle laptop-style power supply and a 19V power supply for the BeagleJuice 2

Components

Resources

Video Demo

Get in touch if you have any questions, or ideas for something you want me to build.