Reddit Twitter Digg Facebook Delicious Stumbleupon

Ultimate Beagle Gadget Pack

View Cart

The Ultimate Beagle Gadget Pack, as the name suggests, contains just about everything an embedded systems developer might need to hack, prototype, and build on a BeagleBoard.

The pack includes the four core Beagle modules: a BeagleBoard C5 , 4.4” BeagleTouch OLED display, BeagleJuice 2 battery pack, and a BeagleMod prototyping board.

It also includes many of the peripherals that might come in handy for developing on the BeagleBoard in a variety of different configurations – from handheld tablet to desktop hardware interface. For communicating directly over BeagleBoard serial, there’s an FTDI-DB9 cable, a null modem adapter, and a DB9 to IDC-10 ribbon cable.

The pack includes a laptop-style, 5V power adapter, as well as a powered 4-port USB hub to connect USB ethernet. Finally, the pack comes with a bootable Angstrom Linux on an 4 GB SanDisk Extreme SD specially formatted for speed.

For prototyping to hacking, or just for fun, the Ultimate Gadget Pack is an all-inclusive kit that gets you up and running for almost any embedded project.

I’ve also included an option to have BeagleBoards with the BeagleTouch headers pre-soldered on.


  • Display: 4.3 inch touch display
  • Screen: 480×272 OLED screen
  • Battery Life: 10.5 hours of battery life
  • Operating System: Angstrom
  • Processor Speed: 720Mhz
  • RAM: 128MB
  • bits: 32bit
  • Cores: Single Core
  • SD Storage: 4GB SD Storage
  • On Board Flash: 256MB
  • Height: 3.63 inches (92.1mm)
  • Length: 4.10 inches (104.1mm)
  • Depth: 1.68 inches (42.5mm)
  • USB Host (Type A): 4 USB Host Port Adapter
  • USB Slave (Mini AB): USB OTG Port
  • Ethernet (RJ-45): USB 2.0 10/100 Ethernet Adapter
  • RS232 Serial Port Debugging: RS232 Serial Port
  • Video Output: DVI to HDMI
  • Video Output: S-Video
  • Speaker (Stereo Headphone Out): 3.5mm Audio Out
  • Microphone (Audio In): 3.5 Audio In
  • Hardware Prototyping Module: Hardware Prototyping Module
  • All-in-1 USB multi-card reader/writer: All-in-1 USB multi-card reader/writer
  • 2- Power Adapters: 5V and 19V laptop-style power supplies


Get in touch if you have any questions, or ideas for something you want me to build.