Equalizershield_logo_small
Reddit Twitter Digg Facebook Delicious Stumbleupon
Equalizershield_logo_small
Equalizershield_angled_small
Equalizershield_close_up_small

zz_EqualizerShield

View Cart
$59.25+

Chuck Norris would be proud. Actually, he wouldn’t, because he already built this on his own, and he does benchpresses off of it, and he doesn’t need the Open Source Hardware Bank’s help. For me, on the other hand (and Chris and Dave), I’ve built an Equalizer on a Shield.

The EqualizerShield has two modes: Justice… and Equality. In the Justice mode, the shield acts as a 10×10 blue LED matrix, addressable over serial from pins 0 and 1 on the Arduino. In the Equality mode, the shield acts as an analog pin visualizer. On the backside of the board, there is an 8-wide female header port where you can wire in any analog signal, and the board will display the status on the LEDs on the front, like an equalizer.

Specifications

  • 100 blue spectrum LEDs
  • 2 Operating Modes, “Justice” and “Equality”
  • Equality operating mode automatically displays the values of 8 analog connections on the LEDs
  • Justice operating more is a serial addressable LED matrix over Arduino pin 0 and 1
  • Fits squarely on top of Arduino and the Illuminato

Made possible by the Open Source Hardware Bank

Normally, this shield would cost someone about $130-155 apiece to make even just 1 of them. It doesn’t even start to get reasonable (for me personally) until about 15 are made. So the Open Source Hardware Bank is going to fund building twice however many are made.

In the meantime, if 50 of these get pre-bought or built by May 3rd (you can keep track by going here), then I’ll use the money to build them. If not enough are pre-built by May 3rd, Mike and I will refund the Paypal transaction. -Buy 1 – a plain old “pre-order” for 1 EqualizerShield(at cost + 15% margin)

-Buy 1, Build 1 – pre-order 1 EqualizerShield, plus fund the production (at cost) of one more that gets resold. When it sells, I’ll send you the money for that EqualizerShield, which includes cost +15% margin. So it’s like getting one EqualizerShield at cost.

-Buy 1, Build 2 – pre-order 1 EqualizerShield, plus fund the production (at cost) of two more that get resold. When the two sell, I’ll send you the money for those EqualizerShield, which includes cost +15% margin. It’s like getting one EqualizerShield at cost, and then an additional 15%, which should cover the cost shipping to most places in the US.

-Buy 1, Build 3 – This is the same as Buy 1-Build 2, except with 3 builds. This was made a popular request for guys over seas who wanted to be able to offset shipping a little more.

Get in touch if you have any questions, or ideas for something you want me to build.